radimsejk

I am finally restocked on PLA so I will try to print something big in safe mode too and attach logs. I hope this will be solved because without Octoprint...

@foosel and @FixxCZ Yes I do have the mentioned plugin. I will try to disable it and print without it. Thank you for your help :)

- All belts and pulleys are snug, power is OK and all affected axis has warm not overheating steppers. - I have printed two designs but smaller ones with no...

I have run 10 hour print last night with DisplayLayerProgress disabled from plugin manger and it completed flawlessly. I have now started 6 hour print and will print for 12...

I disabled the DLP plugin and had multiple layer shifts in latest print right now. With no visible problem on video. Video: https://www.twitch.tv/videos/600091683 Logs and Gcode downloaded from Octoprint: [Link...

@FixxCZ I have: Dashboard (1.11.4) (that is why I have DLP) Exclude Region (0.2.0) Fullscreen Plugin (0.0.4) GCODE System Commands (0.1.1) LayerDisplay (0.4.3) MQTT (0.8.6) Octolapse (0.3.4) Printer Stats (2.0.2)...

@foosel Ok, I will try to print with safe mode only from now on. Let's see. BTW I am printing now the same gcode as before and there is still...

@foosel Yes, I have crash detection enabled. But when the layer shift occurs the printer does not say it detected any crash. It just shifts the layer and continues.

@foosel So i have been printing in safe mode for 4 days with some small prints and two 16 hour prints. Everything is flawless. I will try next to print...

So I have been printing a lot lately and with enabling plugins one after each other I had not any layer shift since (maybe one of latest updates solved it)....