pwe169
pwe169
I forgot to say this issue is with the precompiled latest version Color UI. I went back to 12.0 and still had the issue
A bit more info, the main PCB is version 0.5 2019. I tried to go back to the stock firmware and could not get control of the fan at all...
Hi, Thanks for the answer. I'll give this a try when I get home. I'll also test the wiring out with a 24v PSU to make sure nothings broken -...
Hi, Spent today looking at what's going on. Found the issue with the part fan. There is a 2 pin connector in the head loom that is hidden away under...
With a meter on it the voltages are not stable as if a D to A isn't clocking out properly
hi, Yes you can start with your finger but the power is pretty awful compared to stock. I split the end of my finger on the rear fans with the...
S255 is really weak and unstable on the multimeter, s127 appears stronger - hope this helps Pete
Hi, I have the same problem with postdata. This is the result from -- debug:- pi@allsky:~ $ postData.sh --debug ERROR: Unknown PROTOCOL: 'sftp # or another protocol' postData.sh: WARNING: No...
Thanks for replying Eric. This is what I have:- PROTOCOL="sftp" # or another PROTOCOL All the other images etc upload OK so sftp into my IONOS site works
I am using the release version: v2023.05.01_05