Victor
These are all problems with Bluez and it is not clear why it is used in Home Assistant. Bluez does not yet fully support Bluetooth 4.2 ([Bluez: Core specification 4.2](https://www.bluez.org/profiles/),...
@Deoptim Для тестов HA 20 октября 2023 был установлен новый NVMe 256G (PCIe MAXIO MAP1202A-F1C 2 x YMC3G001Tb62BA1C0) в новую NanoPi-R5S (RAM: 4GB LPDDR4X, 16GB eMMC). Сама база HA переехала...
The greatest dependence is associated with the scanning mode of the external adapter. If the active scanning mode is set, the consumption is maximum. This option is offered by default...
[After the Zigbee firmware](https://github.com/devbis/z03mmc/issues/41), it is required to use the RESET output when starting the "activation" in any programmer. Zigbee firmware completely disables Flash during execution in deep sleep mode...
This is the calculation for Xiaomi LYWSD03MMC B1.4 with a 220 mAh CR2032 battery (+25С). Taking into account the installed capacitor on the printed circuit board in the power circuit....
Our prevailing humidity is >85%. In summer there are two thermometers in the greenhouse. Every night they are covered with dew, in the form of dripping drops... :) The batteries...
Xiaomi LYWSD03MMC V1.9 test on the cheapest CR2016 battery 
If a CR2032 battery drops to 2.200V, then it is considered 0% discharged. At a temperature of -30C, the voltage of the new CR2032 battery is 2.2 V when loaded...
CGPR1 Qingping Motion & Light:   Outdoor temperature: 
> this annoyes me more than the (relative) quick discharging. could it be a FW bug or is it just me? Don't use cheap Chinese batteries. The difference in capacity...