puddly
puddly
The `permit` call is asynchronous, so it permits joins for 60s and then immediately returns. The shutdown code in zigpy-zigate resets the dongle so what likely happens is that joins...
Some more issues: - Reconnection logic in 0.8.0 does not work: if I unplug the USB and plug it back in, the network doesn't really function. - New devices cannot...
deCONZ supports ZGP devices even with the two endpoint limitation so maybe it's not required to explicitly register one? I'll try to join a device to deCONZ and see what...
That's correct. There's no documented way to use install codes with the Conbee.
> Is zigpy-deconz the only radio library for zigpy that doea not support this? It's only supported on EZSP and ZNP coordinators. No other firmwares support it (and likely never...
This has been implemented since https://github.com/zigpy/zigpy-deconz/releases/tag/0.22.0 in November 2023.
Can you upload your `/config/zigbee.db` file? I'm curious to see if your Conbee perhaps changed some critical network setting on its own.
I would also recommend upgrading your Conbee's firmware.
I'm unfortunately seeing no difference between the two, only a single network configuration has ever been seen by zigpy. After upgrading firmware, have you tried taking and restoring a ZHA...
Restoring from a ZHA backup would reset the radio and re-write the network settings. The latest firmware is supported. Is your Conbee on a USB 2.0 extension cable? It sometimes...