puddly

This was discussed in the Matter blog back in January: https://www.home-assistant.io/blog/2024/01/25/matter-livestream-blog/#using-home-assistant-yellow-or-home-assistant-skyconnect

The addon is frozen and will not receive updates for the foreseeable future, unfortunately. Upgrading the SDK may fix one bug but results in many more (we've previously had to...

If you would like to try experimental firmware for the SkyConnect that should eliminate the need for physical resets (source https://github.com/NabuCasa/silabs-firmware-builder/pull/33), I've attached a pre-compiled copy here: [`skyconnect_rcp-uart-802154_4.3.1_wd.gbl.zip`](https://github.com/home-assistant/addons/files/12610325/skyconnect_rcp-uart-802154_4.3.1_wd.gbl.zip) (zipped so...

Thanks! The metadata will be identical, especially when probing. This also makes sure the addon doesn't re-flash the bundled firmware.

Perfect, thank you for the feedback. The watchdog isn't integrated tightly into CPC so it looks like just the CPC part is crashing, not the whole firmware. I'll post an...

Can you describe the Zigbee and Thread devices you have on your networks? Any Zigbee Green Power? I've been able to replicate a crash and will try to get a...

Why do you have firmware flashing disabled? The addon requires specific firmware to run on the device and will install that specific version.

Which error are you referring to? Can you physically unplug the SkyConnect and plug it back in? Re-enable firmware flashing and run it again.

When you say "I've flashed the SkyConnect with the correct RCPMultiPAN firmware", what specific firmware did you install? Do you have ZHA disabled?

As mentioned above, the addon requires a very specific firmware to run on the stick (4.3.1). It's not compatible with the firmware you installed. Double check that you have ZHA...