puddly
puddly
> Also, I do not see the point in printing 10s of lines containing the full trace to the log. Other HA errors print a single line, which has a...
Please enable ZHA debug logging (https://www.home-assistant.io/integrations/zha/#debug-logging) and upload the log. The entries you've posted aren't related to ZHA.
Closing now that #102072 has been merged.
Could you enable https://www.home-assistant.io/integrations/zha/#debug-logging and post the startup debug log?
Also, are you running any custom quirks? I believe this problem was fixed in 2023.5.0b2.
smlight.me's response is incorrect. Joining new devices to a network is completely independent of the Zigbee integration and is handled 100% by the firmware, it doesn't matter if you are...
> So is this a bug in the SkyConnect firmware? Unlikely. The moment the network key is sent to the device and it announces itself, the firmware's role is done....
@aircooledbeemer could you attach the diagnostic JSON from the integration itself? I included a screenshot above to show how to download it. It includes information that isn't in the debug...
For completeness, a ZZH stick flashed with router firmware joins both a normal SkyConnect Zigbee network and a Yellow multi-PAN network within 10s: > When using SLZB-06+Z2M, everything works and...
As the warning says, you have interference problems. `PHY_CCA_FAIL_COUNT = 533` confirms that the radio is dropping packets because there is too much noise. What devices are near your coordinator?...