ptvo
It is a rarely required feature. If you like, you may add time to the "description" field.
You should delete device in Z2M, restart Z2M and rejoin your device again. Z2M should display the new ModelId.
The firmware supports the following: CCS811, Senseair S8, Sensirion SPS30 https://ptvo.info/zigbee-configurable-firmware-features/
Check > Hi, try to switch to the latest dev branch > > https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html#switch-to-the-dev-branch Checked. It works correctly now. Thank you!
I've tested low frequency PWM output that is available in the Premium version with MG90S, and it works well at 120 Hz. The main disadvantage is you cannot use the...
@LenirSantiago With the 50Hz frequency, this range (20 - 79) is rather narrow. I don't know the precise numbers, but in my case, 120 Hz provides more smooth control.
@basalisco How do you see it in your Zigbee environment?
@keynote11 Why do you think that this problem is related to the firmware?
What do you mean by "unreachable"? Does the status led show anything when you press a button on the stick?
The status LED should blink when the device joins or unable to send data. You can also change the status led mode to check that the device is alive.