psiberfunk
psiberfunk
The existing suggested macro here is incorrect/doesn't comply with klipper's expected syntax: ``` [gcode_macro m900] default_parameter_K: 0 gcode: SET_PRESSURE_ADVANCE ADVANCE={K} ``` Note that when you use the current suggested GCODE...
Do you still use the non-OS SDK , even for running on ESP32 chips ? Are there plans to convert over to the RTOS version? The NonOS version is EOL...
@rojer re: > if/when vendors add support to their SDKs. So does mongoose-os on ESP32 then support WPA3 ? And if it doesn't.. is it merely an option that could...
Also interested in this , would be great to have octopod support klipper
Rudimentary inspiration might be drawn from the UX here.. but it is highly constrained by the screen software used on this printer: https://github.com/CR6Community/Marlin/releases/tag/v2.0.8.1-cr6-community-release-6.1
Sorry for so many commits... had to keep correcting for the linter and then make better pictures until I was happy.
Are you looking into integrating SyncDreamer type advances @bennyguo ?
@ACK-J I agree that this breaks a lot of localhost /local LAN stuff people may need. Whitelist would be ideal
So , why , on BambuSlicer , which also has this feature , is this not an issue with the default settings ?
Might I suggest that their defaults are better if they don’t produce this issue ?