profdc9

I seriously looked into this, however, the ADC bug on the current Pico is going to compromise the sensitivity of the receiver by probably 10 dB at least. It would...

Support for ethernet on this board has already been implement on IP65. It is based on plugging a W5500 Wiznet module into the board via SPI into the ATMEGA328P. A...

Dan2eth.drv is just fine as a name for the driver.

I don't have any spare cards right now, but I could build one up. I am quite busy right now so it might be a little while. You could get...

When the initialization occurs, if you do not get a $00, there is an error initializing. I don't at present have any close or shutdown commands or link status, I...

Sorry, I have been very busy the past few days. I was working on getting the AosX you sent me working. Unfortunately I can not use the 800k image you...

By the way, how does AosX figure out which slot the Dan ][ card is in? Does it look for a signature of the ROM? Dan On Fri, Jan 6,...

I have a lcsc.com parts list if you want to look at that. [ProjectBOM.csv](https://github.com/profdc9/Apple2Card/files/8984833/ProjectBOM.csv)

Also here's parts placement [Parts-Placement.pdf](https://github.com/profdc9/Apple2Card/files/8984834/Parts-Placement.pdf)

Here are a few hints: 1. Make sure the output of your soundcard is turned up to maximum volume. You may also want to fit a jumper onto JP6 (this...