premultiply

Client crashes when ATEM config is restored

4

When the Client is connected to an ATEM switcher and the complete switcher configuration is restored from the Blackmagic Design ATEM Software Control the Client crashes immediately.

More time formats

1

In addition to Milliseconds and Frames it would be much better for production use to be able to input Delay and Durations in Seconds (eg. as 5,200), Timecode (like 00:01:15:23...

Should fix #3596

Apply constrained min/maxCurrent from vehicle AND loadpoint

1

If minCurrent or maxCurrent is set on loadpoint and the identified vehicle the final current constraints should by applied with respect to both limitation layers. Example: ``` lp: minCurrent: 6...

Try staged vehicle wake-up first charger then vehicle api

9

Versucht zunächst nach 30 Sekunden gezielt mittels Charger zu wecken (falls entsprechende Charger-API verfügbar). Alternativ macht der Charger das intern selbst und man muss eben nur ausreichend lange abwarten. Wenn...

Add range estimation

2

Fixes #4846

Charger improvements for ABB Terra AC Wallbox with firmware version 1.6.3 (and newer?) from July 2022. !!! Will break compatibility with older firmware - you have to upgrade the firmware...

ABB TACWB: Update charger implementation for new firmware

1

New FW allows setting current by 0x4100 anytime.

All (grid) meter templates have to be checked and enhanced to get signed phase currents where possible. Requirement for load management https://github.com/evcc-io/evcc/pull/3453 Positive sign for import on phase, negative sign...

guardDuration: Show in UI or remove?

5

In dem Kontext hier ist mir aber heute auch noch aufgefallen dass während der Guard-Timer läuft keine passende Textmeldung in der UI erscheint und man sich dann fragt warum gerade...