Paul Reeve
Paul Reeve
I'm working on an N2k project that has to respond to these. I notice that the ISO Request PGN isn't in N2kMessages - I'm happy to add it and raise...
I'm interested in using the NMEA2000 library in a windlass application. This requires extending N2kTypes.h with some relevant enums and I'd like to share this back to this project, but......
## Motivation 1. The next release of the N2K specification will include three new Windlass Network Messages PGNs (see [this Technical Bulletin](https://www.nmea.org/Assets/20190613%20windlass%20amendment,%20128776,%20128777,%20128778.pdf). 2. The Signal K specification has no framework...
The proposal for an N2K [Windlass Network Messages]( https://www.nmea.org/Assets/20190613%20windlass%20amendment,%20128776,%20128777,%20128778.pdf) protocol has now firmed up so the data values used to describe a windlass in at least N2K world are now...
I see that this matter has gone around a few times, but I think the issue of tank fluid types needs re-visiting again. I'm new, so please correct me if...
My Signal K log is filling with the following error messages, approx 1 per 30s or so. I am guessing that my bus includes a PGN that canboatjs can't parse...
Some time ago I reported an issue with a server upgrade which trampled on my my node_modules directory (see #1290). So, this evening I used the Appstore link in the...
Just did an upgrade from within Signal K from v1.37 to 1.38. After upgrade and reboot: 1. My previously installed plugins are no longer detected. The only plugins detected by...
I have a six-channel tank sensor which is configured for 5 active channels and 1 disabled channel. My physical tank gauge always shows the five configured tanks. Historically, Signal K...
I have a use case described briefly below which at the moment requires messy work-arounds because of what might be partial /inconsistent handling of source data in PUT request handling....