prasimix
prasimix
Replace down-programmer MOSFET SMT with THT (TO-220) package for mounting on the heatsink next to pass MOSFET.
[KiCad](http://kicad-pcb.org/) is both free and open source. Other environments are also welcomed, as far as design can be edited/stored off-line (i.e. is not completely cloud based).
Someone fluent in English (or other languages) and skilled in producing user manuals should make a user manual for the EEZ H24005. For local console pages screenshots the Software simulator...
Just a reminder that we are missing this feature. Task description will follow.
The following issues have to be addressed when both channels are using triggering and are not in tracking mode nor coupled: 1. When list is running on one channel, changing...
We can add a new type of protection against over-voltage detection on the outputs. For example someone tried to connect 48 V battery while only 40 V is allowed. If...
Add support for third current range (0-50 mA) that was added on the Power board r5B13.
Idea is to generate over time a collection of various examples how to communicate with firmware via 3rd party so-called SCPI controller software. That could be, if applicable, LabVIEW, BenchVue,...
Due to heating up, the resistance of current sense resistor is increasing and cause voltage drop. Therefore in CC mode output current will gradually drop. Such drift cannot be measured...