Pavel Pisa

Hello, I have found time only now and test state with actual NuttX sources. I test with `tools/configure.sh esp32c3-devkit:twai` but it seems to be problem with most other architectures. When...

Thnaks for the work on subsystems. This is the real need for larger designs... Adding of ports and propagating their names to the superblocks would be great but can wait...

Co se týče RPM, tak jsem již dříve nějaké pokusy s QE kódem dělal. Podařilo se mi vyseparovat QSQLmon a ten korektně vybuildovat pro mnoho distribucí (Debian_Unstable, Fedora_29, Fedora_Rawhide, Raspbian_9.0,...

Dík, Debian 10 Buster používá Qt5 5.11.3-2

I support the proposed method and wait for it for more of our projects. I see another reason to use this algorithm, swapping by smaller parts requires to expose internal...

Please, what is the state for the case? At least some response from MCUboot core developers, if the discussion about alternative is possible and if they hear for preserving Flash...

> It's a no from me, I assume it's a no from @de-nordic too but will let him comment Thanks for response. Please, can you elaborate alternative to keep Flash...

Thanks for elaborate. But I expect that if the update application needs to be updated (i.e update protocol security problem or some incremental changes, reliability increase) then there is significant...

> No change from me Please, can you clarify what you refer to? You have stated that @michallenc work breaks Zephyr > I do not accept this because you are...

I was thinking about Nano-X and our [SuiTk](https://gitlab.com/pikron/sw-base/suitk/-/wikis/home) based on it to be ported to NuttX. I have years of experience with Nano-X or better lower GD Microwindows layer porting...