Paul Melnikov

Hi! I flashed the version you provided, and it worked perfectly right from the start. If I was supposed to disable PPR/EPR from settings menu ("PD VPD0"), then it wasn't...

I confirm that in alpine version it does not work even with TERM=xterm

Does anyone who experience this issue also cannot move cursor with LEFT and RIGHT keyboard keys? Mine do not work inside influx cli when started from `docker exec … bash`....

Yeah, I probably need to pin ESP32 framework version. The current version probably broke previous code.

Hi. This is possible, but I don't fully understand to what extent you need the schematic. There are no ready-made LocoNet boards that can be hooked like an L298 board....

Well, I've tried to make code modular, so stripping physical loconet shouldn't be very difficult. I may try it at the weekend or so. Also, what WiFi do you need?...

So, you can try this branch: https://github.com/positron96/LocoNetControlStation/tree/no-loconet-phy I've removed literally 4 lines of code and the firmware will now work without LocoNet hardware (hopefully).

Also, I don't know if it's ready for use, but this project might also be of interest: https://github.com/atanisoft/ESP32CommandStation

Sense pins are for load and short detection on main track and for reading CVs on programming track. If you don't want to bother or your motor shield does not...

If it has a DIR and a PWM pin, then you don't need an inverter and just connect DCC DATA and DCC EN to them