popcornmix

Pi4 uses 200MHz for and and all older Pi's 250MHz. gpu_freq=250 will have stable frequency on Pi0-3. > Does force_turbo=1 affect system stability/overheating? You'll have marginally higher temperatures due to...

Thanks for this. Can you provide and timing numbers before and after this change that shows the improvement?

We are preparing for a kernel bump in apt, so this won't merge until that's out of the way. There is some risk to a PR like this. We are...

Bumping to a stable upstream kernel release (e.g. 5.18) is testing a known set of commits (that has been peer reviewed by experts in the area). The issue that can...

kodi should be available in repo for 32-bit and 64-bit RPiOS. @RafalNode can you test and close if it works for you?

Read [this post](https://forums.raspberrypi.com/viewtopic.php?p=1935073#p1935073). You need config.txt settings to enable hevc decoder and increase cma.

I think this is at least partly to do with mutter. mutter is enabled by default on Pi4 with 2G or more sdram, if VNC is not enabled. Otherwise it...

@lategoodbye do you agree with my analysis? Does hotplug work for you when mutter is used and fail to work when mutter is not used?

I was using latest rpi-update kernel (would have been rpi-5.15.36, but I don't think newer ones behave any differently). There was a small window when 5.15.34 would hang on boot...

@EdiDD your issue doesn't sound at all related to this one. It seems much closer to https://github.com/raspberrypi/linux/issues/4962