Piotr Markiewicz

sure, no problem On Thu, Dec 3, 2020 at 11:10 PM Raúl Ortega wrote: > Dear @pmarkiewicz , thanks so much for > your contribution. The PR should be done...

if you don't mind I can start looking into that, but I will probably need some help :) regards 2018-03-21 10:53 GMT+01:00 piodabro : > It is possible with PRO58...

never seen other speed, you can of course compile firmware with different speed. THis is from anciet times of MultiiWiiCopter on ATMega. Also here is hardcoded https://github.com/ShikOfTheRa/scarab-osd/blob/131ffd412383cd1d9d747b74d5f177d628481504/MW_OSD/Def.h And in iNav...

but https://github.com/iNavFlight/inav/issues/3127 2018-04-26 13:25 GMT+01:00 Piotr Markiewicz : > never seen other speed, you can of course compile firmware with different > speed. > THis is from anciet times of...

probably, let's wait for answer. 2018-04-26 13:34 GMT+01:00 night-ghost : > so it is too early to drop autobaud > > — > You are receiving this because you authored...

We got answer from iNav team and still have no idea why it's not 115. My problem is that baud autodetection code didn't work for me that why I disabled...

anothere answer clarifies a bit. I think you can reject PR and I will create new one just for roll/pitch and voltage 2018-04-27 13:33 GMT+01:00 night-ghost : > the answer...

hi, there is no option to enable/disable telemetry. I only have selected 30ms interval telemetry. regard On Thu, Jul 24, 2025 at 12:11 AM undiplomatic ***@***.***> wrote: > *undiplomatic* left...

I don't have scope unfortunately On Sat, Jul 26, 2025 at 12:11 AM undiplomatic ***@***.***> wrote: > *undiplomatic* left a comment (iNavFlight/inav#10764) > > > there is no option to...

ok, connected ftdi and there is transmission, I got data below, 115k 8N1 (voltage is about 16V) 21 03 45 00 35 00 00 00 00 15 20 03 45...