pktechnology-code

> @PK2000GIT This is going to be interesting to follow. What did you set "client_ip_address" in your config.json ? "client_ip_address": "127.0.0.1", - which is that same as what I had...

> With the older CGate it was a requirement to edit CGate configuration files to automatically set the default project and start the project. Toolkit does this when you connect...

> I've not used the new CGate but previously you could connect to CGate with telnet. In the past I've connected to CGate with telnet for debugging. From your NAS...

This is what Homebridge Logs shows: [12/5/2023, 12:18:51 PM] [HB Supervisor] Restarting Homebridge... [12/5/2023, 12:18:51 PM] [HB Supervisor] Starting Homebridge with extra flags: -I -P /volume1/homebridge/node_modules --strict-plugin-resolution [12/5/2023, 12:18:51 PM]...

> I will try run a setup over the next few days Thank it will be great if someone can set it up as well and see if they are...

> @PK2000GIT Do you have a download link for CGate 3.2 I can't seem to find one that works. I would like to install on the raspberry pi to debug...

Clipsal have certainly over complicated things with this version. The docker image has all of this already set if you want to try it. Otherwise If you follow their instructions...

This will be wherever you extracted the cgate folder so either one will do as long as long as the cgate.jar is in there. But for simplicity I extracted it...

No I didn't have to touch any Java settings. But I stuck to the spec sheet which says they only tested it on Ubuntu 22.04.3. So the docker image comprises...