Pipiche

Here is what is in the NXP documentation ``` This function requests the 64-bit IEEE (MAC) address of the node with a particular 16-bit network address. The function sends an...

After few tests, it looks like short address doit etre égal à lookupaddress. So no clue why, this should be asked to NXP

quand on passe d'un firmware legacy à un firmware optPDM il est necessaire de faire un Erase EEPROM. L'avez-vous fait. Après il vous faut initialiser la Zigate ... A voir...

Attention quand on flash un firmware optiPdm alors qu'on était en legacy il edt critique de bien faire un Erase EEPROM lors du flash

I'll leave @fairecasoimeme to comment, but here is my understanding you should not have any issue to upgrade from 31a to 31e, and of course from 31d to 31e Going...

indeed both are based on the same 31e code and so functionality, but the OptyPDM has a differnt set of table size in order to follow NXP sizing recommendation. We...

yes, that is correct, you should expect always a OptiPDM and a Legacy version of the Zigate V1 firmware. As the ZiGate V2 it is anyhow a different firmware and...

TS0201 do not use the 0xef00 Tuya cluster, and indeed TS0201 use the standard cluster to provide Temperature and Humidity

Il y a des chances qu’il fonctionne comme le BSO

> @manup related to the previous discussion in [dresden-elektronik/deconz-serial-protocol#17](https://github.com/dresden-elektronik/deconz-serial-protocol/issues/17) I probably missed something I understood that deConz set 0x01 and 242 ( 0xf2 ), but he was not mentioning 0x50...