Pipiche

Error 0x15 --> #334

Error 0x80, can you elaborate on which condition did you get ? So far we have been able to identify 0x80 on the Bind ( 0x0030 ) command 0x80 -->...

> In the meantime, could you elaborate on status ? I still don't understand the mapping between status code and ZPS_EVENTxxxxx codes. Or may be there is no link at...

I think the answer is in each of the source file with that header. * This software is owned by NXP B.V. and/or its supplier and is protected * under...

Dans la mesure ou ni le Status ni le NwkStatus sont à 00, je ne suis pas certain que ce qui est après est correct ! > On 5 Nov...

C'est la Stack Zigbee3.0 de NXP qui fait ca ... Donc je doute qu'on puisse établir une relation directe

https://www.nxp.com/docs/en/user-guide/JN-UG-3113.pdf Section 2.5.2 The ZigBee stack network layer supports a ‘route discovery’ facility which finds the best available route to the destination, when sending a message. A message is normally...

in such case, the best is to simply stop the plugin. un-plug the Zigate. wait for 1 minute and then plug-in again, and restart

most-likely the device restarted and so do a Device Announcement. Buggy firmware , or not supporting LQI request

In the same area, I don't know if you have seen it buut it looks like the profalux doesn't provide the RelationShip information. For all my shutters the Relationship field...