Media Card volume buttons sensitivity

[FrankJaco]

Is your feature request related to a problem?

I use a combination of a slider with volume buttons for setting my various media players volume.

On a mobile phone the slider is good for setting relative volume fairly quickly, but not precise enough to get it exactly right. Fortunately Mushroom's media card provides volume up and down buttons as well. Alas they are not sensitive enough or programmable for range (at least I haven't figured our how to change them). A press of either button results in a change of 4 volume steps (out of 100), which often is too coarse. I would like to see a change of 1, or better yet the amount of change programmable.

Describe the solution you'd like

The basic solution would be as mentioned above is to set the change to 1 or make them programmable. However...

My ideal solution would be a long (full width) slider for coarse control. Then a press and hold event on the slider itself brings up the volume + - controls where the slider was allowing fine adjustment. This stays visible until either of the buttons haven't been pressed for say 5 seconds, then the volume buttons go away and the slider returns.

This same UI could be used on many other Mushroom cards... Light, Climate, even Cover.

fj

Describe alternatives you've considered

No response

Additional context

No response