philpem
philpem
I have several email accounts configured in PostfixAdmin for applications -- so they can send password-recovery emails and similar notifications. Currently I have these set to forward to a 'catch...
#### Bug description: `tsdektec` doesn't set the ASI port to output mode on the Dektec DTA-115 #### How to reproduce: - Run `tsdektec -o0 0` (assumes the DTA-115 is device...
I notice that Quickdisk support has been added to FlashFloppy. The Nintendo Famicom Disk System is based on QD and has a similar I/O interface. What would be required to...
It would be useful for Greaseweazle to be able to DC-erase all or a subset of the tracks on a disc. This is done by enabling the write gate but...
UNIX 3.51 boots fine after installation. After shutting down and rebooting, however, the UNIX PC hangs on the "waiting" screen. This is due to the modem port and UART not...
Macros are used extensively within the code, especially in the emulator interface (memory access). The way they're used rarely follows best practice, looks messy, and confuses the way the code...
The main window should have a status line with e.g.: * Diagnostic LEDs * FDD mounted Y/N (click to unmount) * Floppy disk access indicator * Hard disk access indicator
The 3B1 supports up to three S4BUS-interface expansion cards. Examples include the Ethernet, StarLAN and Combo Card. Emulation support for S4BUS would allow emulation of these additional interfaces, and perhaps...
Freebee currently doesn't emulate the printer port. This would be nice to have.
I've been trying to run HackTV on a Raspberry Pi 4 B+ (4GB RAM). This setup works fine when showing a test card at an 11MHz or 14MHz sample rate,...