Philipp Fo comments

Results 9 comments of


                                            Philipp Fo

Output only contains "There are no input files to process." on OSX

having the same error. should be due to some permission problem

Integrating Harmony chain to Celo's optics bridge

is still open as a bounty? a colleague & I would love to work on this as a collab 😄 if so could you provide us with an invite for...

2 Omnipod Eros deactivated with 0x12 in Loop 3.2.3 even though Loop Cycle Time is limited

A week ago, I tried limiting the Loop Cycle Time to 5mins with the suggested patch. Unfortunately, I am still experiencing the same issue, every Pod only runs for around...

2 Omnipod Eros deactivated with 0x12 in Loop 3.2.3 even though Loop Cycle Time is limited

I don't have a different RileyLink Device right now. In the nighttime, I keep the Rileylink on the bedside table where it doesn't bolus sometimes, so seems out of range...

2 Omnipod Eros deactivated with 0x12 in Loop 3.2.3 even though Loop Cycle Time is limited

Hey, thanks a lot for your help! Yep opened up the .txt file in VS Code, I definitely feel confident with the instructions, I'll will rebuild it and report back.

2 Omnipod Eros deactivated with 0x12 in Loop 3.2.3 even though Loop Cycle Time is limited

Hey @marionbarker I think this has improved my issue, thanks a lot for your help so far! The first pod (1 day old) has run out after 1 day 22...

2 Omnipod Eros deactivated with 0x12 in Loop 3.2.3 even though Loop Cycle Time is limited

Hey thanks @marionbarker! OrangeLink arrived, will try it out soon :) Just had the following error: 0x34 (reset from unknown cause) after just 36 hours, which might be unrelated. Attaching...

2 Omnipod Eros deactivated with 0x12 in Loop 3.2.3 even though Loop Cycle Time is limited

Yes I agree, it's annoying, especially with the amount of Pods it's hard to justify replacements for social insurance. Anyway, I just had the same issue again, the pod is...

2 Omnipod Eros deactivated with 0x12 in Loop 3.2.3 even though Loop Cycle Time is limited

@marionbarker with OrangeLink, 3 days in and still running. Report: [Loop Report 2024-02-20 21:57:35+01:00.md](https://github.com/LoopKit/Loop/files/14351069/Loop.Report.2024-02-20.21.57.35%2B01.00.md)