philipherbert

to document here: circulation active is not working in ems-esp in this setup. EMES ESP always shows off state. Diagnostic page shows PS13 DHW circulation pump 0% or 100% it...

DHW Mode on thermostat: EMS-ESP BC400 Thermostat calls the 'reduced' temperature on freshwater station: 'normal' Comfort is Comfort When setting to Auto on Boiler Display: EMS-ESP Shows Own Prog When...

for verification, I have captured more data: I will answer the other questions when I have more time. need help with setting custom entity to verify flow rate - perhaps...

I have captured a few more settings: - temp diff return valve K - setting Circulation Pump Pulse-Control (Yes/No) - setting TimeControlled Circulation Pump yes/no - error display (alarm relay...

excellent. For testing time / thermostat I will possibly need more time. tested. the version downloaded 'test' Tag, I hope this is correct) Setting for cicrulation pulse mode still missing,...

>>could be 7E0, offset 5 changing 0xFF(on) to 0x00(off)`? no, changes to true when tap is opened, but has nothing to do with the circ pump. Any Idea what else...

Is functionality not also defined by the dip setting ? Regarding entities. I have not yet reached the point, which of the entities are actually working. Some dhw entities of...

after loading: EMS Tx Errors: syslog shows loads of Datum,Zeit,Stufe,Hostname,Kategorie,Programm,Nachrichten 2023-11-04,15:55:50,Debug,192.168.121.229,kern,1,2023-11-04T15:55:49.845238+1:00 ems-esp emsesp - - - 000+00:06:00.068 D 68: double json key: collectorshutdown 2023-11-04,15:55:49,Debug,192.168.121.229,kern,1,2023-11-04T15:55:49.845054+1:00 ems-esp emsesp - - - 000+00:06:00.068...

watermodule not in mqtt

api/water works "wwc3": { "wwtemp1": 21.7, "wwtemp2": 0, "wwtemp3": 21.8, "wwtemp4": 22.9, "wwtemp5": 45.3, "wwtemp7": 21.7, "wwpump": false, telnet: Water Module: SM100/MS100 (DeviceID:0x2A, ProductID:163, Version:27.09) (18) wwc3 temperature 1 (wwtemp1):...