Philibert Cheminot
Philibert Cheminot
> but only read them Okay, in this case it's easy, I just didn't take the time to test the EEPROM reading, but it won't take me long to set...
Hello Don't worry, I have to do it. If you want to make tests you can try to modify the program: https://github.com/philibertc/micronova_controller/blob/master/tests/esp8266/test2_read.ino Sincerely, philibertc
Hello, Thank you for your contribution! I'm testing this out as soon as I can, then I'll probably incorporate it. Bests, philibertc
Hello, if there is the connector it is almost sure that it can communicate, because it can be useful in some cases for the repairer in case of failure. This...
Hello, This is really embarrassing. Are you sure you have connected the cables correctly?   Sincerely, philibertc
Hello, > I also measured all pins with my oscilloscope, but no obvious digital signal is visible This is normal: the stove does not send any information until it is...
Have you tried any of the test programs?
Solved on commit "Fume temp" https://github.com/philibertc/micronova_controller/commit/77ca5469e7868de4700d771c248f1fcc638f5586
The problem has been solved for several people, but for some the value is not stored on the same memory address. So I will work on referencing all possible addresses.
## List of possible addresses - 0x3E (default) - 0x5A - 0xFF