Peter Feerick

You probably need to reconfigure those GPSs... they need to be outputting NMEA messages, and it seems they are configured for UBOX binary by default. https://www.hglrc.com/products/m100-5883-gps > 6. Output protocol:...

Just to keep the information for this together in one place, it seems like it should be an extra trim step mode... i.e. coarse is 32 steps vs 128 steps...

Indeed. It is something that has been requested before though (https://github.com/EdgeTX/edgetx/issues/3108), so it seems there is a need for that. If we were to go that way it would make...

I'm not seeing this on the Companion simulator with a new setup, so perhaps check what Radio Settings -> Hardware -> Switches shows for SG/SH ... what is the name...

high, middle and low is three steps, no? It's sort of in the name ;)

I was referring to the maximim number of trim "positions", as anything else is relative to the current position, so is just confusing. On Mon, 8 Jan 2024, 8:51 pm...

> I have gotten some of weird issues now and then. With input names not wanting to change after I had changed them once before. And it usually comes down...

@ammikey I need you to check the `RADIO/radio.yml` file as per https://github.com/EdgeTX/edgetx/issues/4483#issuecomment-1873049090 or upload it here (either zip your MODEL/RADIO folder up and upload it, or change the extension of...

few days plus reminder ;)

By definition, 3P disables trims, no? The functionality he wants is a three position trim... https://github.com/EdgeTX/edgetx/issues/4514#issuecomment-1880442429 ... if we had separate trim coarseness settings that could just be another trim...