Peter Feerick

This is somewhat related to https://github.com/EdgeTX/edgetx/issues/1858

> Just like the flashing firmware, it need a long press [Enter] to erase. No. The sequence is currently Erase Flash Storage => Erase Flash Storage (Hold [ENT] long to...

I'll have to check on the PL18EV, but I bet you do... not sure this is right? Looks like it **is** halting until ENTER release when in the `ST_CLEAR_FLASH` phase......

I just verified on PL18EV that this same behaviour was happening. It did not happen on 2.10 bootloader, however, so most likely stemmed from one of the key handing change...

When > Then my Tx display goes dark, and liftoff says I've lost connection. is the power LED on the radio still on? If not, what happens if you hold...

Ok, so the really does seem like for some reason it just powered off. The 6POS buttons and leds are controlled by their own MCU, and are probably being powered...

For the ShowItAll widget... any idea what version you're currently running, and if updating it makes any difference (if you open the main.lua file in the WIDGETS/SHOWALL folder, you should...

Just my 2c... there are already widgets like https://github.com/moschotto/OpenTX_GPS_Telemetry (shows GPS info, has history logging) and https://github.com/kristjanbjarni/opentx-widgets (GPS widget shows GPS info and Google Plus code) ... at the end...

README for that Lua says colorlcd support is a TODO still... i.e. only talks about tested/supporting B&W screens. On Sun, 23 June 2024, 6:08 am Tomas Sodergren, ***@***.***> wrote: >...

It may become possible to use the native LVGL QR code generation soon (if not already possible) since LVGL widgets have recently been exposed to Lua scripts ;) On Mon,...