Peter Feerick

Most likely a nightly firmware downloaded using a nightly version of Companion from https://github.com/opentx/opentx/releases/tag/nightly It would be needed in order to have https://github.com/opentx/opentx/commit/29dd63af8bf7217033e1b5a553db0ccb9454546a and https://github.com/opentx/opentx/commit/6fef3b6849250bc3185553381b8a94f63da5fa4f, which allows for OTA firmware...

I don't want this to seem like a OpenTX bashing thread... (especially given I'm also on the EdgeTX project steering committee, but have also been a long time OpenTX user)......

Unfortunately newer versions of OTX beyond 2.0 and 2.1 are not recommended. https://www.open-tx.org/2018/02/26/avr-pull Your best option may be to check this fork, as another user was trying to fix some...

I can also confirm on a 9XR Pro that this issue exists. I updated from v2.0.3 where I had no startup or shutdown issues (but the graphic 'corruption' on startup...

I just checked the SD card I'm currently using, and it is FAT formatted /w 32k sector size, and is the 2GB cheapie that I got with the transmitter. The...

So you don't get this? This screenshot was taken on Linux btw. 

Why does it need to be the full state? Why not be able to read/write the required details (i.e. MCU ID/binding UUID), and let the MPM continue to worry about...

EdgeTX's VCP-CLI mode allows you to send commands to the transmitter, which among other things allows you to power cycle/reset the module, toggle the boot pin, and bridge the serial...

ELRS doesn't have a CLI either... instead, it's looking for a boot pin that is held down on power on, to go into bootloader mode. Which is what that snippet...

> dedicated charging port Ah, so that's why the USB_CHARGE define wasn't making much sense to me... the 'dedicated' is missing :laughing: Should just be able to go with the...