peteshoard
peteshoard
I would love to be able to do this with Tasmota and am willing to test - not sure I have the skills to be able to build anything effectively...
Testing against the pre-loaded release 1.0.3. Currently powering the board off of a 12v LED transformer, think it runs 1a. I haven't tried measuring the voltage during unlock with the...
I'm using your OEM board, and a12v LED 0.5a power transformer. I have 2 setups and this issue is only happening on one so I'm going to check polarity. On...
I will test mine tomorrow and let you know the results, it's in a waterproof box outside and it's dark at the moment. The input shares a line with a...
Now Tested: I see minor differences in the voltage/amperage parameters the board that is functioning correctly/as expected has an input voltage of around 12.40v which drops to just below 12v...
Any update on this one?
Would it be possible to have the doorbell button generate an MQTT message?
Is the door name consistent in all messages? Door open/closed and authentication/failed auth?
Not on every message, only the boot message. On Thu, 12 Sep 2019, 19:46 Jon Griffith, wrote: > @peteshoard , are you not getting a > payload that contains the...
Time also does not persist during reboot, see images 