Peter Newman

What are you talking about, just the Markdown files in the root? No promises, but it should be on my mentioned issues list now... Actually you might need to ping...

Hi @Aworldc , Did you see the suggested schematic in the blog linked from the Plugin's readme documentation: http://eastertrail.blogspot.co.uk/2014/04/command-and-control-ii.html There's also a copy of the plugin docs here: http://docs.openlighting.org/ola/conf/ola-uartdmx.conf.html You...

Sorry but you're probably out of luck then. The UART on the Pi generates TTL level unbalanced signals, and DMX is balanced RS-485 level. How many lights have you got?...

Generally a config.log helps, but as @kripton says @cbix has found the cause. If you just need to get going in the short term and don't need OSC, you should...

Please can we have the olad -l 4 logs @ping-mee : https://www.openlighting.org/ola/get-help/ola-faq/#How_do_I_get_olad_-l_4_logs I suspect it might be down to a lack of unique serial numbers off the top of my...

It looks like you may be able to do it with FT Prog: https://www.alauda.ro/2013/11/changing-ftdi-descriptors/ However if they've all got the same serial number they're probably cloned rather than genuine FTDI...

I had a quick look and couldn't spot anything immediately obvious. I suspect something isn't pulling in enough Python or similar, although it's curious that our ola-python tests deliberately pull...

I've removed Test Sid for now from the 0.10 and master CI. We just need to remember to re-add it when the issue is fixed.

Curious @hgshoggins I don't think we've seen this one before. As a first question, what OS, what version of libmicrohttpd have you got installed etc. As a quick check, there's...