peterbmckinley
peterbmckinley
Hi Im keen to use this with my Orange Pi Zero setup. Luma.oled is installed and working, and can display all the luma.examples. I'm using an SSD1306 controller OLED display...
Hi Nick, Fantastic work on the LicheePi Nano. I was hoping to use your repo as a starting point to getting the MangoPi-R3c board working, as the vendors Buildroot repo...
Hi we have a partially working image based on the V2 firmware from MangoPi https://github.com/mangopi-sbc/buildroot-mangopi-r However OTG doesn't work, lsusb prints no info at all with a usb wifi dongle...
c-stack.c:55:26: error: missing binary operator before token "(" 55 | #elif HAVE_LIBSIGSEGV && SIGSTKSZ < 16384
>>> toolchain-external-custom Downloading cp -v '/root/arm-buildroot-linux-gnueabi_sdk-buildroot.tar.gz' '/home/peter/buildroot-2023.02-unframework-nano/output/build/.arm-buildroot-linux-gnueabi_sdk-buildroot.tar.gz.FCAOJq/output' cp: cannot stat '/root/arm-buildroot-linux-gnueabi_sdk-buildroot.tar.gz': Permission denied wget --passive-ftp -nd -t 3 -O '/home/peter/buildroot-2023.02-unframework-nano/output/build/.arm-buildroot-linux-gnueabi_sdk-buildroot.tar.gz.QpeVC4/output' 'http://sources.buildroot.net/toolchain-external-custom/arm-buildroot-linux-gnueabi_sdk-buildroot.tar.gz' --2023-05-07 12:49:48-- http://sources.buildroot.net/toolchain-external-custom/arm-buildroot-linux-gnueabi_sdk-buildroot.tar.gz Resolving sources.buildroot.net (sources.buildroot.net)... 172.67.72.56, 104.26.0.37, 104.26.1.37,...
c-stack.c:55:26: error: missing binary operator before token "(" 55 | #elif HAVE_LIBSIGSEGV && SIGSTKSZ < 16384
c-stack.c:55:26: error: missing binary operator before token "(" 55 | #elif HAVE_LIBSIGSEGV && SIGSTKSZ < 16384
oledterm
My setup: Orange Pi Zero Armbian Buster 1.3" OLED on i2c bus, SH1106 controller I have all the luma.examples running fine (with the exception of the Raspberry Pi camera specific...