Per Tillisch

Thanks for your report @wavoigt. I'm going to ask you to provide some additional information that might help us to identify the problem. Please do this: 1. Close all Arduino...

Hi @Ilkhomjon2002. > after uploading some sketch to board Please provide the sketch in a comment here on the issue thread. Please also tell us which Arduino board you are...

I don't use EventGhost anymore, but I'll contribute towards the domain registration fee if needed.

This was fixed incidentally by https://github.com/espressif/arduino-esp32/pull/9340 This is the line of the script that produced the warning: https://github.com/espressif/arduino-esp32/blob/5502879a5b25e5fff84a7058f448be481c0a1f73/tools/gen_esp32part.py#L517 The warning was produced when compiling sketches under the following conditions: -...

We'll leave this open to track the need for someone to add a comment documenting this important information to avoid this otherwise unintuitive code causing the same confusion to others...

Thanks @BetterComputing. For the sake of making the information available to the reviewers, I'll note here the two other alternative proposals that have been submitted for fixing this bug: -...

Hi all. It seems this is going off topic. While it is very interesting, I will request that all further discussion on this issue thread be restricted exclusively to the...

Hi @frankB415. Thanks for taking the time to submit an issue. I see we have another report about this at https://github.com/arduino-libraries/NTPClient/issues/84. It is best to have only a single issue...

Hi @Haschtl. Thanks for your suggestion. I see a "USBMIDI" library has been added to the `arduino/ArduinoCore-mbed` repository that contains the codebase of the Giga's "**Arduino Mbed OS Giga Boards**"...

Hi @Moses0524. Thanks for your report. I am also able to reproduce the fault you describe using my "V9.0" [**9 Axis Motion Shield**](https://docs.arduino.cc/hardware/9-axis-motion-shield) on an [**UNO R4 WiFi**](https://docs.arduino.cc/hardware/uno-r4-wifi) board. Please...