Per Tillisch

Hi @nickzam. > Search term "megatinycore" just not appearing in the list of librarie This is expected. The reason is that "megaTinyCore" is not a library. It is a boards...

This was resolved at one point, as was indicated by the closure of https://github.com/SpenceKonde/megaTinyCore/issues/1059 on 2024-03-29. Unfortunately the renewed certificate expired once again yesterday, so we are back to the...

> Perhaps might be a Windows problem? I confirm. I am still able to reproduce the fault using the build from https://github.com/arduino/arduino-ide/commit/aa9b10d68e6653b7f40ab920173c7964aaefbfa4 on two separate Windows machines by following the...

Hi @maciejmiklas. Thanks for your report. Does the error still occur if you close the **Serial Monitor** tab in the bottom panel of the Arduino IDE window before uploading? You...

Thanks for checking @maciejmiklas. I am able to reproduce this fault, but only under specific conditions (FT232 chip, Windows, using Serial Monitor/Plotter) and I wanted to make sure the fault...

Hi @ananzjo > any advice please This is not an appropriate place to request advice. This issue is only used by the developers to track the bug. If you would...

Thanks for taking the time to make an investigation @kittaakos! I am sorry it wasn't so simple as I had hoped. Since you are now most familiar with the problem...

Unfortunately it was not fixed by #2334. I am still able to reproduce the fault using aa9b10d.

Hi @jenschr. This issue is specific to boards that use an FTDI FT232R USB chip. There are other unrelated causes of the "Access is denied." error. The DFRobot Leonardo does...

Hi @The-Young-Maker. We will need far more information in order to proceed with the investigation of the problem you are attempting to report. Keep in mind that I can't see...