pepsi-zero

Not an issue. But sucesfull functionality

1

I just received the newer ESP32-C3. (M5Stack) And in non of the documentations I could find if it will support HID over BLE. I can confirm that it worked with...

USB-C voltage trigger

1

CC1 is connected to CC2 and share only 1 resistor. According to the USB PD2 design documentation must CC1 and CC2 each have it’s own 5k1 resistor.

Incorrect silkscreen

1

I have started with the Marco Keyboard Budget version. The silk screen has some errors It states 1k resistor's, where the schematic has 10k resistors The 1.3 screen has gnd-vcc-scl-sda...