Preston L. Bannister
Preston L. Bannister
Reading through the wiki pages, and I have questions. :) For the topic [Hardware Needed To Use g2core](https://github.com/synthetos/g2/wiki/Getting-Started-with-g2core#hardware-needed-to-use-g2core): 1. Some discussion of the hardware needs for 3D printing would seem...
@justinclift I have not yet returned to this topic. Looks to be a week or two away.
So ... off by a couple weeks. This is more of an FYI. Not making an ask. Started by trying to trying to compile on a Raspberry Pi3 (will be...
FYI, compiles fine on a 32-bit Ubuntu VM (no surprise): Ubuntu 16.04.4 LTS (GNU/Linux 4.4.0-116-generic i686) ``` $ time make PLATFORM=DUE BOARD=gShield -j4 ... Making binary bin/gShield/g2core.bin --- SIZE INFO...
Thanks for clarifying the branch choices. To clarify my interest... I have two 3D printers at present, and am building a third of my design. The third printer is to...
Should have mentioned, the printer is using CoreXY, which seems to have not yet landed in the master branch: #215 and/or #285 . So ... maybe not the **master** branch....
The last bug that went around took me out for a week, about three weeks back, and still lingers. :/ Did find the example CoreXY usage. Going to look at...
If so then all the Printrbot (and Ultimaker) definitions in *master* are a lie. :) CoreXY support is not in master, as yet.
What branch are @abdrumm and the Printrbot folk using?
FYI, when switching between branches, I needed to delete: `rm -rf g2/Motate/Tools/linux` Otherwise I got a link(?) error when compiling on **master**. Not sure the exact cause. Might want a...