Pau Serrat Gutiérrez
Pau Serrat Gutiérrez
I do the 4 corner calibration the best I can. Photo with 4 corner calibration:  My camera captures the bed this way:  In addition, why my 4...
My Snapmaker started to lose the wifi network on every power off after the new update. I'm running Luban last version and Snapmaker firmware last version too. Every time I...
Hi, the 3d printing work area has the ability to select everything using control + a or control + e, for exemple. Although we can select and de-select things (using...
I don't know if it's normal but my machine disconnects from wifi of the Luban software once the g-code is received. Should it stay connected forever and only disconect once...
The only way of powering off the snapmaker machine is by turning off the button on the power module. I don't know if this makes any damage to the software,...
Everytime I try to resize the photo processed by the camera on the laser, luban work area freezes and it's impossible to edit any text, shape, vector or image, even...
As the tittle says, sometimes I run the camera capture feature of the laser with luban to have the background and see where I want to engrave. Then, at half...
# 🐞 feature request ### Is your feature request related to a problem? Please describe. We should be able to change infill pattern for the first and last layers ###...
Printed this in a Snampaker 2.0 a250 using PLA after doing a 5x5 point calibration from the display (max calibration mesh from display). It's easy to see that something is...
Hi, a lot of people are having issues with first layer adhesion on 3D Printing module with Snapmaker 2.0. While ABL should compensate for a warped and not straight bed,...