Paul Tanner

I was getting the same error with node v0.10.7 on a Mac (Snow Leopard) I applied your fix to see if it would help. It fixed the call to client.account...

I am using a mac osx (snow leopard) node v0.10.7. Planning to move to debian linux when this is working. the app instance I created at dbox is still in...

@glyn sent me this https://github.com/emoncms/usefulscripts/tree/master/mbus and I also saw that I was using a serial port not /dev/ttyUSB0. I modified the check script to try all 254 possible addresses but...

Yes @glynhudson. Forgot to check before submitting. I have since found that the sontex is set to 2400 baud and address 0. Am trying to find out how to change...

The problem is that the meter does not respond at all. The device address is set to zero. I have asked Sontex if I can change that setting another way...

I have now set the meter address to 1. Still no response.

I'm wondering what other settings might be needed? baud rate looks OK (2400). pi is connected on /dev/ttyUSB0.

 This is battery-powered. The only connections at the moment are 2 temp sensors, one flow meter and the mbus. This is the type that has the mbus module...

Yes. Stockshed (Sontex dist) confirm that power is required. Now I need to know how to do that. I can run AC power to it but do not have the...

Correction: apparently the normal approach is for the data logger to power the m-bus, not the meter (as there may be multiple data sources on the m-bus). Looks like I...