paulhothersall

The problem is the GoPro as the WiFi AP means you can have 2 WiFi adaptors, but with the addresses the same, the host OS will not realise they are...

> RPi3 to the best of my knowledge does not have USB controller capable of working in gadget mode. The RPi4 100% does, on its USB-C port. you are correct...

I have openauto PRO (licensed) on a pi3, and also crankshaft. Both of those work as head units from a stock pixel setup starting setting up with a ubuntu 20.10...

the Pi4 2GB Ram version REALLY doesn't like building anbox! I could make a coffee on the CPU. Even the uSD card gets hot from IO thrashing, so dropping that...

good point, a lightweight "video stream only" --> head unit is a thought I have right now possible by having the hardware encoder on the pi4 even taking the framebuffer...

/home/ubuntu/AA/AACS/AAServer/include/InputChannelHandler.h:14:8: error: ‘set’ in namespace ‘std’ does not name a template type 14 | std::set registered_clients; | ^~~ /home/ubuntu/AA/AACS/AAServer/include/InputChannelHandler.h:6:1: note: ‘std::set’ is defined in header ‘’; did you forget to...

> #include worked, and RealWorld™ in the way of any more setup for next few hours. will let you know how I get on later

ok, ubuntu and OTG stuff seems "interesting". So AAServer can't find USB to use etc Using raspberry pi OS seems easier for that, however, I can't build with cmake --...

Yeah. It will pass that with a manual libpcap build . The base raspberry Pi OS is still 32bit !

hmm /AACS/build/AAServer $ sudo ./AAServer Got 51, write=2 Got 51, write=2 Got 51, write=2 Got some info: 0= Got some info: 0= Got some info: 0= Got some info: 1=Android...