Patrick Collins

I'll update the instructions to include a mosfet and an off switch. A lot of people seem to need this.

Here is my recommendation. It should work fine. Buy a logic-level mosfet. I would recommend either the IRLZ44N or FQP30N06L. The fan's power needs to connect to the Drain pin...

Please confirm that your yaml also has min_power set to 0 in the ledc configuration

> Hello, today the MOSFETs have finally arrived and I put the programming that @patrickcollins12 says and it works perfectly. I wanted to know if you could help me one...

> Great project. Currently using silent wings fans.. all wires are black so a bit trial and error finding out which is which… so I may have an error here...

> > Here is my recommendation. I've not had a chance to test this, but it should work fine. > > > > > > Buy a logic-level mosfet. I...

Yep, totally possible, I like the idea. At the moment I set my temp at 30 in winter and 32 in summer. To some degree, you need to honor the...

You can dynamically adjust the pid target temperature to be the same as your external temperature sensor. https://esphome.io/components/climate/#climate-control-action Then set a dead band on your pidclimate of +/-2 degrees. You...

yes, add a 2nd or 3rd fan to move more air and check the ventilation in and out. As for the lower RPM it's possibly because you haven't removed my...

No. This potentiometer kit has a power supply and analog potentiometer built in. I would only keep the fans, cut the head of the female socket and rewire it to...