Patrick Collins

@stoffelll I have 50 Ikea bulbs and no such problems. I suggest reviewing your setup. I'm using zigbee2mqtt and USB stick zigbee controller. Do you see the same non-responsiveness from...

@rct 's suggestion here saved me. I now have this up and running. Definitely need to incorporate his notes. In particular in my case it was the suggestion that ha...

any interest in including this in the next release @OttoWinter ?

I think ready to merge.

@OttoWinter I resolved all of your issues. The only thing I did not agree with is, in the documentation I have kept the threshold_low/threshold_high in the example because I think...

@jesserockz or @OttoWinter wondering if I could bother you to pass your eye over this and merge it. I'm confident it is working. But it we leave it longer it...

> If it broke after a HA update, I would suspect it is throwing some more verbose errors in the logs. There have been some things HA have been depreciating...

A few theories. I notice that the update frequency in your log is more frequent than 1 second. Note the update_frequency below. Double check your update frequency is >1.3s, since...

that graph shows it reducing to 88.2 not to 0.0? My DHT-11 Perhaps your ESP32 board? Is it really logging during that period or is the ESP32 locked up with...

Try reducing the update frequency to every 10 seconds. Try a better sensor like the BME280 https://randomnerdtutorials.com/dht11-vs-dht22-vs-lm35-vs-ds18b20-vs-bme280-vs-bmp180/