pascallanger

Sure, can you explain me what you've done so far? (Sorry just trying to catch up with things lately)

Ok so let's go for M2

Right, DSM is not supported only DSM2 and DSMR. Let's see if you have access to the cyrf6936. You might look at the receiver side as well.

Usually there is nothing to see on the RF module pins unless you open it... Check the RX instead

> But searching the fcc id we can see a CYRF6936 inside https://fcc.report/FCC-ID/BRWDAMTX11/1166223 this is not useful ? Yes there is a cyrf6936 but there is also a controller on...

Bind ===== C=42 Enhanced pid=2 S=Y A= 01 03 05 07 09 P(15)= 01 D0 06 00 00 81 00 00 00 69 5F C8 00 00 E8 Packet[0] =...

> Having trouble getting the serial monitor to output anything. Hummm that's strange since the module does output data right away. Have you used Arduino for the output? https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Advanced_Debug.md May...

That should work right away with debug serial. The module gives it's ID as soon as you power it on (a model using multi needs to be loaded and the...

@Pencilvestr Compile the latest code from a few minutes ago, upload and select the protocol xn297dump/nrf, set option or rf channel or rf (whatever your TX displays) to 80 Make...

I don't understand why you have to press the bind button, that has no real effect apart from restarting the protocol... So the packet content is F4 71 8D 01...