pascallanger

@wbmitchell138 Do you have access to a spektrum radio? If yes, everywhere you see Unknown_XXX, please write down the XXX and the **exact** text which appears on the spektrum radio...

If you look at this sequence on youtube: https://youtu.be/VJ0m2S42QPI?t=135 You'll see that the menu is similar (line positions including spacing) compared to your picture:  So most likely: Unknwon_D3 =...

@FOTO-PETE Thanks for the unknowns. Does it mean the script works well for you?

The multi module does not have the RF component to support/emulate the AT9(S) hardware. I'm currently adding support for the air protocol Radios/T Series and surface protocol Radios/RC.

Keeping it open so people stop asking...

As you can see on the vendor website this is a RX for AT radios so no... The list of compatible receivers is listed here: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#radiolink---74

Never had one in my ends. So I don't think it's supported. I can have a look but I would need the TX and model to be sent to my...

The RF component is unknown. Without having access to the radio and RX there is nothing I can do to help. I'm in France so you can see if shipping...

You can surely change the RX+ESC combo to make it a classic car. Multi supports multiple car protocols so just pick and choose the one you prefer.

Couple of things: - Have you done the RF frequency tuning as indicated under the [RadioLink protocol](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md) details? https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Frequency_Tuning.md - Have you setup your failsafe as indicated to prevent things...