Parvaiz Ahmad

@alexinstrell facing exactly the same issue, tried multiple things but no luck. Have you resolved this issue? If yes, kindly let me know how. Regards.

@alexinstrell thanks for response. By the way I have figured out the solution but was not able to trace the exact problem. If you want to work with PS3 controller...

@alexinstrell did you removed the caches of Arduino IDE? You can use https://dl.espressif.com/dl/package_esp32_index.json link to install the board, well on my end I am able to install all the things...

@alexinstrell contact me on my email id I may be able to help you through call.

@alexinstrell check this https://www.youtube.com/watch?v=6c8ieMyK2sQ

@alexinstrell I think we should be good with 1.8.16, because problem is not with Arduino IDE, it is with esp32 board and Ps3 Host controller library, as long as we...

@alexinstrell You can find that sketch on github branch I have updated the branch, link is in the description of video.

@Erkki507 are you connecting ground properly? Can you check output voltages of L298 driver at 5 volts terminal?

@vandjac it should work fine, may be there is some issue with your controller or esp32 board,