paralichko

Hello, thanks for the answer. Is it the same with the battery voltage ? Is it reported wrongly by the original firmware ?

In the home assistant there is battery voltage showing 3.1V all the time. What real batteey life You achive ? 1 month, 6 months, 1 year ?

As You have explain, longer than 5sec is not OK? I have tried with 10s, and have lost an hour in recoverihg with reading all the topics and using nRF...

For the reset pin, i mean the function that sets it to 1 or 0 depending on temp/hum Lower power consumption is if i set very low temp for threshold...

How You measure the % of the battery ? It's some kind of coltage to % scale ?

Thanks On Thu, Dec 16, 2021, 02:04 Victor ***@***.***> wrote: > https://github.com/pvvx/ATC_MiThermometer/blob/master/src/battery.c#L80 > battery_level = (battery_mv - 2200) / ((3100 - 2200) / 100); > > — > You are...

I have fight with this. I think that is somehow stream dependent. Something about time metadata in the stream. With my stream it is behaving in Your way, but on...

Give me Your skype contact or find me in skype - paralichko

@kslimani - please check www.elemental.tv - they are using "normal" receiver and it's working. I know this, because if i get their stream, it's working also on my test page...

@summitsingh And which from this initialisation is fixing the problem ?