Bjørn

Actually, using a constant offset of 39.7 will not work very well. I have compared the TEMPerHUM data with an older TEMPer sensor, both located at the same position for...

I do not believe that tempered -c 39.7 does the trick. See my comment above. The temperature might look correct, but only for values around 25°C. Check the measurements in...

Unfortunately, I do not own the sensors (they belong to the university I am working at). Hence I cannot crack it open, even though it's quite tempting. By the way:...

  I managed to open the device (see attached images). I'm not sure is the visible chip is the sensor or the controller, but there is some print "1238"...

Thanks! I just googled a bit and found this: http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7005.pdf Looks similar - and the number "7005" might fit. I just haven't had the time to read the datasheet yet.

Thanks for your quick implementation. However, we've been some troubles during compilation and during runtime. Cmake reports the following error: > Please wait while cmake processes CMakeLists.txt files.... > >...

Whoo, I have had so much things to do that I kind of forgot about this one. However, I would like to bump this issues, as we still have a...

Update! I "solved" the issue. A few explanations for all those who have the same problem: 1) ./hidtest-hidraw gives Device Found type: 0c45 7402 path: /dev/hidraw1 serial_number: Manufacturer: RDing Product:...