SOLVED : tcl/airsense.cfg:75: Error: invalid command name "mrh"

[DiegoGiovany]

Open On-Chip Debugger 0.10.0 Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html Info : auto-selecting first available session transport "hla_swd". To override use 'transport select '. Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD adapter speed: 2000 kHz adapter_nsrst_delay: 100 none separate Info : Unable to match requested speed 2000 kHz, using 1800 kHz Info : Unable to match requested speed 2000 kHz, using 1800 kHz Info : clock speed 1800 kHz Info : STLINK v2 JTAG v29 API v2 SWIM v7 VID 0x0483 PID 0x3748 Info : using stlink api v2 Info : Target voltage: 3.101916 Info : stm32f4x.cpu: hardware has 6 breakpoints, 4 watchpoints tcl/airsense.cfg:75: Error: invalid command name "mrh" in procedure 'script' at file "embedded:startup.tcl", line 60 at file "tcl/airsense.cfg", line 75

[DiegoGiovany]

any ideas?

[DiegoGiovany]

SOLVED: use updated version of openocd, not the one installed via Mac brew

[Grawer]

Just a note, Open On-Chip Debugger 0.10.0 (2020-12-28) works fine, while base 0.10.0 version doesn't.

[beast-in-black]

openocd v0.11.0 (built from the source of the v0.11.0 tag) also works fine.