opus506

Anyone try merging everything yet? I'm going to try and merge to a dev branch tonight if not.

I forked and applied all the changes bbkiwi suggested. The webui works as it should now and the system runs at very high hz now compared to the 20-30hz I...

The mic goes between the tout (analog in) and ground, with an addition wire connected to the + pin with a 10k resistor connecting to the 3.3v. I ended up...

Check your Tout to see if its functioning, perhaps its damaged, maybe it was hit with 5v? Try the software demo from the Groove product site. Flash your nodemcu with...

RX is not for the mic, it's for ws2812 LEDs. Move that connector to the top left pin on your nodemcu, the tout pin. On Sunday, August 6, 2017, Carlos...

Your yellow wire goes to the top left tout pin. The black to ground, the red to 3.3v On Sunday, August 6, 2017, Ryan Greene wrote: > RX is not...