2nd tracking restart from the 1st point of the 1st tracking

[GuyGeneau]

2nd tracking line restart from the 1st point of the 1st tracking line

Reproduction steps

1. Start tracking on a layer.
2. Start tracking on a second layer.
3. Stop tracking on one or both layers.
4. Restart tracking on one of the two layers:

When STARTING tracking, not using the RESUME function, the starting point of the tracking is attached to the FIRST point of the previous line.

Expected behavior

start a new tracking line not attach to the previous one

Observed behavior

when the use simultaneous tracking, the starting point of the tracking is attached to the FIRST point of the previous line for the others tracking strarted.

Screenshots and GIFs

Desktop (please complete the following information)

• Windows 10
• QGIS Version [e.g. 3.34.5]
• QFieldSync Version [e.g.4.9.1]

Mobile (please complete the following information)

• Device: [Samsung and Blackview]
• OS: [e.g. Android 11 and 12]
• QField version: [Enter QField version here including build number found in the about screen after the release name example 2.0.0 (72be17)]

Additional information

• Problem started happening recently, didn't happen in an older version of QField: [can provide the info]
• Problem can be reliably reproduced, doesn't happen randomly: [Yes]
• Problem happens with all files and projects, not only some files or projects: [Yes]

[If the problem happened with QFieldCloud, please add your username and project name.]

[nirvn]

Confirmed.