sensors-software
sensors-software copied to clipboard
sourcecode for reading sensor data
Have a new station using SPS30. On the measurments I get PM1&PM2.5&PM4&PM10 readings. Issue is that the PM2.5 and PM10 readings are most of the time the same or only...
I would know if the airrohr-firmware is concerned FragAttacks vulnerability?
Hello. I have a problem. BME 280 does not transfer data to https://maps.sensor.community/#2/0.0/0.0 Before that, there was a BMP 280 sensor and there were the same problems. All values are...
Just stumbled across this nitrogen oxide and ozone sensor, available at mouser for just about 10 euro. Don't know more about it than it's pretty new. Have you considered this...
my micro sensor SDSO11 does not give a pm measurement but temperature, pression and humidy are ok. Is it due to a failure de micro sensor or a link between...
hin und wieder liefert der SDS011-Sensor für einige Messintervalle keine Werte. Zu sehen unter anderem [https://api-rrd.madavi.de/grafana/d/GUaL5aZMz/pm-sensors?orgId=1&theme=light&var-chipID=esp8266-14837740](hier). Läuft an ESP-8266, Firmware Version: NRZ-2020-133/EN (Nov 29 2020) Hier einmal Debug-Log mit Max...
I'm getting incorrect readings with the SDS011 and NodeMCU v3 running NRZ-2020-133: SDS011 | PM2.5 | 230.8 µg/m³ SDS011 | PM10 | 248.2 µg/m³ This is a brand new setup...
I have configured a NodeMCU with an SDS011 and DS18B20 sensor. Both are configured but the 1 Wire DS18B20 on D7 (GPIO13) cannot be read - ## Sending to madavi.de:...
Mein Sensor schreibt mit folgendem Script jeden Tag CSV Dateien auf meinen Pi: https://github.com/opendata-stuttgart/madavi-api/blob/master/data_simple.php Die Uhrzeit die angegeben wird weicht aber von der richtigen Zeit um 2 Stunden ab. Das...
SCD30
What are the connection pins of the SCD30 on the particulate matter sensor?