sensors-software
sensors-software copied to clipboard
opendata-stuttgart
sourcecode for reading sensor data
Since about six weeks ago my BME 280 has started to report 100 % humidity when it is raining. The sensor was installed almost a year ago and did not...
For problem with the Beta firmware 22 August 2021: jump to the post below from sumerland --- Original post but it turned out, Last OTA doesn't mean that the last...
Dear Developers, we outsourced 35 devices to people who undertook to power the device. Now we should have enter a [custom server access](https://www.metnet.hu/) to all the devices' configuration which is...
For some reason, I need to change my nodeMCU. But when I do that the ID of my sensor changes and so, I lose the continuity in my data. By...
Under certain circumstances NRZ-2021-134-B4 fails to parse an updated configuration file with a setting "Höhe über Meeresspiegel (m)" that has more than 1 digit as height above sealevel. So 0...
please update the wiring description [PMS1003 to PMS6003](https://github.com/opendata-stuttgart/sensors-software/tree/master/airrohr-firmware#pms1003-to-pms6003) it does not work, when pins 3 and 6 (SET and RESET) are left floating both pins must be tied to 3v3,...
Between 26.07.21 02:00 and 27.07.21 02:00 PM2.5 and PM10 values spike to peaks approximately 10 times higher then previous year values. The high PM values dropped back to familiar values...
With firmware NRZ-2021-134-B4/NL the rhoh wifi is blocked with a password. But what's the password to enter the setup page?
Testing the beta software there are five entries for the BME 280 sensor. Both pressure and temperature have two lines. Please see picture below  Firmware: NRZ-2021-134-B4/SE (Aug 10 2021)...
Hallo, seit fast einem Jahr Betreibe ich einen Luftdatensensor. Heute habe ich nun eine Mail erhalten, dass der Sensor keine Daten mehr liefert. Ich habe das überprüft und festgestellt, dass...
