onlyoneme

I'm testing [MOKO W2](https://www.mokosmart.com/wp-content/uploads/2019/09/Beacon-W2.pdf) wristband actually and it seems to work really nice as a wearable beacon. It has 6 slots which can be configured independently for broadcasting different iBeacon...

> great news. where to buy (international/europe) ? www.beaconzone.co.uk is the only one European store I'm aware of. And it's only for B2B and quite expensive. Apart of that I've...

You can focus on selected devices using Include / Exclude filtering. You can control the frequency of MQTT messages with Report early / Skip reporting settings.

@bogorad Temperature or humidity monitoring are special cases which are not a part of main ESPresense purpose - movement and presence tracking, which requires constant messaging. If the frequency of...

I have access point and an extender with the same SSID and different BSSIDs derived from MACs. My espresense devices have no issue connecting any of them, so I guess...

Maybe there are roaming issues there. Or esp device doesn't try to connect to another AP with the same SSID when the preferred (with strongest signal) one denies to connect...

It's blinking now, thx. But flash power seems to be much lower compared to constant flashing on inverted setting. Is it by purpose?

> Yeah, it's PWM now so we can have more than on or off. I default it to lower brightness since loads of people complain about the brightness. Would you...

> You can change it via MQTT already, but it needs to save/restore on boot or else you'll have to keep setting it. It looks "inverted" there. I have just...

> #654 fixes the extra LEDs in mqtt Wiil it also fix incorrect message for active led state, shown as "OFF"?